Продукти
Wind Turbine Grid Tie Inverter
# Parallel Function up to maximum 9 units : Enlarge More Loads .
# Communication option: External WIFI, Supervise at Any Time.
# Slim Body, Convenient Installation And Transportation, Cheaper Freight by Air,Sea and Land.
# PF1.0, High Efficiency, Lower consumption : Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving.
wind turbine grid tie inverter
Feature:
# Parallel Function up to maximum 9 units : Enlarge More Loads .
# Communication option: External WIFI, Supervise at Any Time.
# Slim Body, Convenient Installation And Transportation, Cheaper Freight by Air,Sea and Land.
# PF1.0, High Efficiency, Lower consumption : Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving.
# Support working without battery:Reduce solar system cost and save money.
# High precision of output voltage,±5 percent ,take care of your appliances.
Product Parameters:
BWGA wind turbine grid tie inverter | ||||
Model | GA3024ML | GA3024MH | GA5048MH | |
Input | Phase | L plus N plus PE | ||
Nominal Voltage | 208/220/230/240VAC | |||
Voltage Range | 154-264VAC±3V(Normal Mode) 185-264VAC±3V(UPS Mode) | |||
Frequency Range | 50Hz/60Hz(Adaptive) | |||
Output | Rated Power | 3000W | 3000W | 5000W |
Output Voltage(AC) | 208/220/230/240VAC±5 percent | |||
Output Frequency | 50/60Hz±0.1 percent | |||
Waveform | Pure sine wave | |||
Време за прехвърляне (по избор) | 10ms for computer , 20ms for home appliances | |||
Peak power | 6000VA | 6000VA | 10000VA | |
Overload | Battery Mode: | |||
Peak efficiency (battery mode) | >94 percent | >94 percent | >94 percent | |
Battery | Rated voltage | 24Vdc | 24Vdc | 48Vdc |
Constant voltage charging voltage (Optional) | 28.2Vdc | 28.2Vdc | 56.4Vdc | |
Floating charge voltage (Optional) | 27Vdc | 27Vdc | 54Vdc | |
charger | PV charging method | MPPT | MPPT | MPPT |
PV max input power | 1500W | 3500W | 5500W | |
MPPT tracking range | 30~115Vdc | 120~430Vdc | 120~430Vdc | |
Max PV input voltage | 145Vdc | 450Vdc | 450Vdc | |
Max PV charging current | 60A | 60A | 80A | |
Max AC charging current | 60A | 60A | 80A | |
Max charging current | 120A | 60A | 80A | |
Display | LCD display | Operating mode/load/input/output, etc. | ||
Communication port | RS232 | 5PIN/Pitch2.0mm, baud rate 2400 | ||
Expansion & configuration port | 2×5PIN/Pitch2.54mm, lithium battery BMS communication card, | |||
Parallel interface | No | Yes | ||
Environmental parameters | Operating environment temperature | 0~40 degree | ||
Operating environment humidity | 20 percent ~95 percent (Non condensing) | |||
Storage temperature | -15~60 degree | |||
Altitude | The altitude should not exceed 1000m, derating above 1000m, | |||
Noise | Less than or equal to 50db | |||
Certifications | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 | |||





How To Connect Wind Turbines And Solar Panels
Solar and wind power are two of the most popular sources of renewable energy. Indeed people have been comparing the pros and cons between the two and debate which is better. But why settle for one when you can have both? Yes, wind and solar power can be combined into a hybrid energy system.
To combine wind and solar power, connect the wind generator to the solar panel battery inverter. If the inverter does not support wind turbines, it must be replaced with a hybrid inverter and battery that are compatible with wind generator systems.
How To Install A Wind Turbine On A Solar Panel System
Most grid tied solar systems don't have batteries because the grid serves as their battery. But you can still use wind turbines if you want. There are three ways to do this. Again, this is for grid tied systems.
Method 1: Replace your current inverter with a hybrid inverter and battery. Connect the battery and the wind turbine. That's it. You should be able to test the system and get confirmation it works. The step by step process varies per system, but after connecting to the turbine to the generator, there should be an indicator from the inverter that installation was successful.
Method 2: Install a wind generator compatible hybrid inverter. You don't have to remove your existing inverter, you will have two. Connect the wind turbine to the hybrid inverter via its battery. This is a good option if you do not want to get rid of your current battery and willing to install a new one instead.
Метод 3: Ако вече имате съвместим инвертор, свържете вятърната турбина, инвертора и слънчевите панели към една батерия. Докато батерията е съвместима с вятърната енергия, системата ще работи. Само специфични видове инвертори могат да работят тук, така че проверете ръководството за инверторния продукт.
Как да свържете вятърна турбина със слънчев инвертор
There are four ways to combine a wind turbine with a solar panel system.
Install a wind turbine on your current solar panel system
Connect a wind turbine to a 48V solar battery
Install a wind turbine with high voltage batteries
Connect the wind turbine to an off grid system
You can connect a wind turbine to an inverter if it has the same voltage and has a DC output. Inverters convert DC to AC, so if the wind turbine already produces AC power it may not run with the inverter. This may or may not be the case. You can check your inverter manual or contact the manufacturer. They will be able to tell you if it is compatible with wind turbines or not. At the very least they shold be able to offer some advice.
Популярни тагове: wind turbine grid tie inverter, China, suppliers, manufacturers, factory, buy, price, best, cheap, for sale, in stock, free sample










